Horizontal Biomass Fiber EFB Rice Husk Pellet Mill Machine 110kw
Remarks
◆ The above capacity comes from 8mm biomass pellets production.
◆ The final capacity of Pellet Mill depends on the features of raw
materials, operation and maintenance,etc.
◆ There are 2 rollers in the pressing chamber.
Main technical parameters :
| Model | MZLH420 | MZLH508 | MZLH678 |
| Capacity(t/h) | 1-1.5 | 2.5-3 | 2-3 |
| Main power (kw) | 75/90 8/6P | 110/132 8/6P | 185/200 8/P |
| Feeding Power (kw) | 2.2 | 2.2 | 3 |
| Pellet Diameter (mm) | 6-12 | 6-12 | 6-12 |
Model | MZLH420 | MZLH508 | MZLH678 |
Ring die inner diameter (mm) | 420 | 500 | 688 |
Ring die working width(mm) | 90 | 100 | 110 |
Ring die linear speed (m/s) | 3.16 | 3.78 | 3.54 |
Number of clamp | 3 pcs | 3 pcs | 8 pcs |
Number of roller | 2 pcs | 2 pcs | 2 pcs |
Number of cutter | 1 pcs | 1 pcs | 1 pcs |
Motor power | 90+2.2+0.75 | 90+2.2+1.5 | 185+3.0+1.5 |
Motor rotation speed | 750 | 750 | 595 |
Ring die hole diameter(mm) | 6/8/10 | 6/8/10 | 6/8/10 |
Main Features
1. Gear driven.
2. Force feeder.
3. Safe protection mechanism for both workers and machines.
4. Siemens motor, imported bearings.
5. Alloy steel or all stainless steel ring die.
6. Auto cooling and oil adding lubrication system.
7. Controlled length of pellet.
8. Optional Conditioner.
9. Optional Intelligent automatic control system.
The structure of Horizontal Biomass Fiber EFB Rice Husk Pellet Mill Machine
1. Feeder&Observation Hole:
Variable Frequency speed control, observation window to inspect the
pelletizing at any time .
2. Forced feeder:
The average quantity is fed to the main engine at a constant speed.
3.Pelleting Chamber:
Insist of two rollers, ring die, and fixing parts.
4. Safety device :
the safety pin and switch is equipped to protect main shaft and
stop the electric when iron go into the chamber .
5. Ring die lifting device :
Roller shell and Ring die replaced easliy with lifting device
6. Ring die :
Customized raw material and imported processing equipment and
profession heating treatment compared to others .
How to work of Horizontal Biomass Fiber EFB Rice Husk Pellet Mill Machine
The material in the granulation bin is fed into the chute by the
feeding auger, the material enters the pressing chamber through the
forced feeder, and is fed into the two pressing areas in the ring
die by the feeding scraper. Due to the high-speed rotation of the
ring die The material is brought between the ring die and the
pressure roller. Under the strong extrusion action of the ring die
and the pressure roller, the material is gradually compacted and
formed in the die hole. Because the extrusion of the material
between the die rollers is continuous , so the formed material is
continuously discharged from the die hole in a columnar shape, and
then cut into particles of the required length by the cutter, and
then enters the next process.
The compression ratio of Horizontal Biomass Fiber EFB Rice Husk Pellet Mill Machine
(Compression Ratio= L/D L: Effective Die Hole Pelleting Length; D:
Effective Die Hole Dia)
Generally speaking, the higher the compression ratio, the denser
the finished pellets. But it does not mean that the higher the
compression ratio, the better the pellet quality. Compression ratio
should be calculated based on your raw material for making pellets.
Commonly compression ratio is inversely proportion to the hardness
of raw material, the harder the raw material, the smaller the
compression ratio.
The Spare parts of Horizontal Biomass Fiber EFB Rice Husk Pellet Mill Machine
1. Ring die :Pellet dies must resist abrasion, corrosion from chemical
exposure and breakage caused by the physical stresses of pellet
formation. The optimum die combines high resistance to abrasion,
breakage and corrosion with maximum productivity. Our expertise
enables us to precisely match the die specification to your
required formulation, even if it means customizing a die pattern to
meet your exact needs.
2. Roller shell :
Each die and roller assembly stay together as a unit, extending die
and roller life and enabling easy storage and conversion.
Raw material :alloy steel .
Others such as five piece cover ,o ring ,main shaft etc .
Why chooseing us :
1. large CNC die drilling center
2. Pellet mill machine assembly and testing center
3. Large embryo forging base
4. Auxiliary manufacturing base and pellet production test center
